Warehouse and Industrial Fit Outs Redcliffe
Twenty-five years of commercial carpentry behind every Redcliffe warehouse fit out. One team accountable for the sequence, the coordination and the finish.
Quest Renovations in Redcliffe
Quest Renovations fits out warehouse and light industrial tenancies throughout Redcliffe — from a single office and kitchenette in a strata unit to a full front-of-house, mezzanine and amenities build.
Our team has been doing commercial carpentry and fit out work for more than twenty-five years. On a Redcliffe project that means the sequencing is planned before anyone picks up a tool — which is where most fit out overruns actually start.
Our Melville base puts Redcliffe inside our regular working area, so site visits during the build are straightforward.
Get In Touch
What We Cover on a Redcliffe Fit Out
What follows is what a typical Redcliffe warehouse fit out covers. Not every project needs all of it, and we would rather scope it down to what you need than sell you a stage you can do without.
A typical Quest warehouse fit out in Redcliffe covers:
- Commercial flooring — carpet tiles, vinyl plank, safety vinyl and sealed or coated concrete
- Kitchenettes and lunchrooms — cabinetry, benchtops, sinks, appliance provisions and integrated desk nooks
- Glazing and doors — framed glazed doors, internal windows, borrowed light panels and secure entry points
- Painting and finishing — sealing and painting block work, plasterboard, skirtings, architraves and reveals
- Amenities — staff toilets, showers, change areas and accessible facilities
- Mezzanine floors — additional floor area over office or storage zones where the shell height allows it
- Racking and bollards — protection for corners, door frames and partition ends in forklift traffic areas
- Commercial shelving and storeroom joinery — built to suit what you actually store rather than a catalogue size
- Acoustic separation — insulated stud walls and sealed junctions between the office and the warehouse floor
- Strip out and make good — removing redundant ceilings, ductwork, partitions and fixtures left by previous occupants
On most Redcliffe projects the strip out reveals something the drawings did not show. We would rather find that early and tell you than discover it at the finishing stage.
Getting the Redcliffe Office Layout Right First
In most Redcliffe units the office is a small proportion of the floor area and most of the fit out budget. It is worth spending the planning time on it.
The specification we default to on a Redcliffe office is a full ceiling grid with LED panels, cassette air conditioning set out to the finished layout, carpet tile through open-plan areas and vinyl plank at reception. It is not exotic. It is simply what holds up and what looks considered five years in.
Power and data set-out deserves ten minutes of thought before the walls are lined. Where the desks sit determines where the outlets go, and adding them afterwards means either surface conduit or patching a wall you have just paid to finish.
Plan the layout before anything is framed
On a Redcliffe fit out, workstation count, which roles need an enclosed office, where the meeting room sits relative to reception, how people move between the office and the floor — all of it gets settled on the drawing rather than on site. Moving a wall after the ceiling grid, lighting and air conditioning are installed is the single most expensive change on a fit out.
Fit Outs in and Around Redcliffe
The lunchroom is the part of a Redcliffe fit out that gets used every single day by every single person in the building, and it is usually the first thing cut when the budget tightens. We would push back on that.
Bench and appliance provision should follow headcount, not floor plan symmetry. We will ask how many people are on site at once and how they take their breaks before drawing a Redcliffe kitchenette.
If the tenancy is leased, check what the lease says about amenities and make good before you build. It is a five-minute conversation with your agent that occasionally changes the whole Redcliffe scope.
Fit Outs in and Around Redcliffe
Redcliffe lies about 8 km east of the Perth CBD, within Perth’s eastern suburbs. For our purposes it is a part of Perth where much of the commercial stock is light industrial units and strata warehouse complexes. The wider setting is the river foreshore, with parkland, walk trails and open water close at hand.
The fit out work we are most often asked for in Redcliffe includes:
- Suspended ceilings dropped over the office end to make it liveable to work in
- Lunchroom and toilet upgrades in units where the amenities date from the original build
- A single office and kitchenette built into a strata warehouse unit
- Mezzanine office floors added over the front of the tenancy where height allows
- Commercial shelving and storeroom joinery
- Strip out and make good of a previous tenant’s partitions, ceilings and ductwork
If you are taking on a Redcliffe tenancy, walk it once with a builder before you sign. What the shell already has — three-phase supply, existing amenities, slab drainage positions, ceiling height at the front — makes a substantial difference to what a fit out costs, and none of it is obvious from a floor plan.
Redcliffe is not the only industrial pocket we work in around here. See also warehouse fit outs in Ascot, Belmont, Bayswater, Ashfield and Perth Airport.
Servicing Redcliffe from Melville
Being Melville-based, Redcliffe is well within our normal working radius. We can get to site quickly for the initial look, and just as importantly we can get back there when a set-out question comes up part way through the build.
If you are weighing up a tenancy in Redcliffe and want a builder’s read on what it would take to fit out, that conversation is free. Call 0438 952 515.
Some of our work
Beyond the Fit Out — Redcliffe
The same team covers the following for Redcliffe clients:
- Carpentry Services — Our skilled carpenters provide tailored solutions for all your woodwork needs, from framing and trimming to custom furniture and repairs, ensuring top-quality finishes.
- Cabinetry Services — Enhance your storage spaces with our custom cabinetry services. We design and install durable, stylish cabinets built to suit the space.
- Commercial Renovations — Shopfront fit outs, office partitions, suspended ceilings, storerooms, mezzanine floors and back-of-house upgrades across Perth.